the compleo duo

the classic for all opportunities

DUO is the best seller for charging in public and semi-public spaces such as companies, municipalities or customer car parks. Equipped with convenient one-hand operation, increased vandalism protection and state-of-the-art communication features as well as versatile billing options, the charging stations offer everything operators and customers need.

DUO is available in the Advanced and Highline versions. The Highline version offers even more safety and availability through vandalism protection with lockable type 2 socket outlets and self-resetting residual current devices (RCD). Both variants can be base mounted as well as wall or post mounted.

Type 2 socket outlet or with attached spiralled type 2 charging cable
Lighted and lockable sliding cover with LED status display
Over-voltage protection in accordance with DIN EN 61643-11

Charging in compliance with calibration law with SAM
bright 4.3" graphic display
hot-pressed, glass-fibre reinforced SMC housing
two charging points with max. 11 / 22 kW

features

highlights

1 2 3 4 5

1
Type 2 socket outlet or with attached spiralled type 2 charging cable (as ICON + POI element)
2
Lighted and lockable sliding cover with LED status display
3
hot-pressed, glass-fibre reinforced SMC housing: lightweight, durable, impact-resistant, weatherproof, self-extinguishing (UL94-HB) andleakage current protected (as ICON + POI element)
4
Bright 4.3" graphic display
5
Charging in compliance with calibration law with SAM^®

additional features

Installation: WM, PM & BM*
access from front for installation and maintenance
safe access due to covered electrical components
automatically reactivating RCD
Maximum safety through hardware-based redundant cut-off

Over-voltage protection in accordance with DIN EN 61643-11
OCPP 1.6 JSON via integrated 4G modem or 100 Mbit/s Ethernet interface
Connection to practically every backend possible
Load management capable

*WM - Wall Mounted = wall mounting
*PM - Pole Mounted = pole mounting
*BM - Base Mounted = mounting on existing ground surface or on an optional plinth

technical specifications

compleo duo bm

Model name:
Compleo Duo WM/PM/BM

Number of charging points:
2

Charging mode:
Mode 3

Charging points:
Option 1: 2 x type 2 socket outlet, maximum 11/22 kW, including sliding cover; automatic
locking at the start of the charging process as well as unlocking
at the end of the charging process or power failure

Option 2: 2 x attached spiralled type 2 charging cable with 11/ 22 kW and 4 m useful length

Dimensions (HxWxD):
1000 x 400 x 225 mm (WM/PM)
1441 x 400 x 225 mm (BM)

housing material:
hot-pressed, glass-fibre reinforced polyester (SMC)

Locking:
Swivelling lever, prepared for accommodation of one
profile half cylinder; optional: two profile half cylinders

Weight:
approx. 35–45 kg (depending on development status

Design:
Single-colour paintwork in RAL 9010 (pure white)
Optional: Paintwork, film lamination upon request

Construction / Assembly:
WM: Wall mounted
PM: Post mounted
BM: Base mounted or on an optional plinth

Rated voltage, rated frequency:
400 V / 3 ~ / 50 Hz

Connection range:
5-pole connection via master switch
and PE terminal (up to 35 mm²)

Over-voltage protection:
Type 1+2+3 in accordance with DIN EN 61643-11, all-pole

Output rating (per charging point):
11 kW/22 kW (configurable)

Maximum input current (per phase):
32 A/63 A (configurable)

Fuse protection:
2x RCD type A/2x DC residual current detection 6 mA
2x circuit-breakers C20 3P+N/C40 3P+N
1x circuit breaker B16 1P

Earth system:
TN

Stand-by consumption:
< 13 W

Rated voltage, rated frequency:
400 V / 3 ~ / 50 Hz

Connection range:
5-pole connection via master switch
and PE terminal (up to 35 mm²)

Over-voltage protection:
Type 1+2+3 in accordance with DIN EN 61643-11, all-pole

Output rating (per charging point):
11 kW/22 kW (configurable)

Maximum input current (per phase):
32 A/63 A (configurable)

Fuse protection:
2x RCD type A/2x DC residual current detection 6 mA
2x circuit-breakers C20 3P+N/C40 3P+N
1x circuit breaker B16 1P

Earth system:
TN

Stand-by consumption:
< 13 W

Communications protocol:
OCPP 1.6 JSON
Connection to practically every backend possible

Authentication option:
RFID, Remote, without (Charge for free)

LED status:
LED status display per charging point

Communications interface:
integrated 4G modem
100 Mbit/s Ethernet connection (e.g. Modbus)

Display:
Graphic display (4.3")

IP protection class:
Housing IP44, relevant components IP54

Standards:
DIN EN 61851-1
DIN IEC/TS 61439-7

Compliance:
CE, RoHs, REACH

Storage temperature:
-25 °C to +80 °C

Height:
maximal 2000 m

Mechanical impact resistance:
IK10

Calibration law/Meter:
MID-compliant Smart Meter
optional: with storage and display module (SAM®) for
compliant with calibration law billing available according to charging capacity
or charging duration

Operating temperature:
-25 °C to +40 °C

Humidity:
< 95 % (non condensing)