compleo duo fleet

compleo duo fleet

the extensive one

the compleo duo fleet

for complete charging infrastructures, vehicle fleets and fleets

Whetherorganisations setting up an e-fleet for their workforce or charging infrastructure operators and their e-vehicle customers; all project planning begins with these central questions: How many charging stations do I need and how flexibly can the charging options be expanded for my company and my customers?

The DUO-Fleet busbar system allows many charging stations at one location. There are connections with branching-off options for further charging stations. This allows easy expansion of up to 36 charging stations per connecting cable. Access and outlets for new cables are already located as standard at the Compleo charging stations and a central cable supplies all charging stations with power. In this way, the infrastructure grows with your requirements

  • attached spiralled type 2 charging cable

    attached spiralled type 2 charging cable

  • up to 50 percent on cost savings when installed by

    up to 50 percent on cost savings when installed by Use of busbar instead of star cabling

  • Planning & project planning from a single source on request

    Planning & project planning from a single source on request

  • Charging in compliance with calibration law with SAM

    Charging in compliance with calibration law with SAM

  • bright 4.3" graphic display

    bright 4.3" graphic display

  • hot-pressed, glass-fibre reinforced SMC housing

    hot-pressed, glass-fibre reinforced SMC housing

  • two charging points with max. 11 kW

    two charging points with max. 11 kW

features

highlights
1 2 3 4
  • 1

    attached spiralled type 2 charging cable

  • 2

    hot-pressed, glass-fibre reinforced SMC housing: lightweight, durable, impact-resistant, weatherproof, self-extinguishing (UL94-HB) andleakage current protected

  • 3

    Bright 4.3" graphic display

  • 4

    Charging in compliance with calibration law with SAM®

additional features
  • Installation: WM, PM & BM*
  • access from front for installation and maintenance
  • safe access due to covered electrical components
  • Maximum safety through hardware-based redundant cut-off
  • Over-voltage protection in accordance with DIN EN 61643-11

 

  • OCPP 1.6 JSON via integrated 4G modem or 100 Mbit/s Ethernet interface
  • Connection to practically every backend possible
  • Load management capable

*WM - Wall Mounted = wall mounting
*PM - Pole Mounted = pole mounting
*BM - Base Mounted = mounting on existing ground surface or on an optional plinth

technical specifications

compleo duo fleet

Model name:
Compleo Duo Fleet WM/PM/BM

Number of charging points:
2

Scope of delivery:
including Ethernet switch, load management
and lock cylinder

Charging mode:
Mode 3

Charging points:
2 x attached spiralled type 2 charging cable
with 11 kW and 4 m useful length

 

Dimensions (HxWxD):
1000 x 400 x 225 mm (WM/PM)
1441 x 400 x 225 mm (BM)

housing material:
hot-pressed, glass-fibre reinforced polyester (SMC)

Locking:
Swivelling lever, prepared for accommodation of one
profile half cylinder; optional: two profile half cylinders

 

 

 

Weight:
approx. 35–45 kg (depending on development status

Design:
Single-colour paintwork in RAL 9010 (pure white)
Optional: Paintwork, film lamination upon request

Construction / Assembly:
WM: Wall mounted
PM: Post mounted
BM: Base mounted or on an optional plinth

 

 

Rated voltage, rated frequency:
400 V / 3 ~ / 50 Hz

Connection range:
5-pole connection via master switch       
and PE terminal (up to 35 mm²)

Over-voltage protection:
Type 2+3 in accordance with DIN EN 61643-11, all-pole

Output rating (per charging point):
11 kW (configurable)

 

 
 
Maximum input current (per phase): 
32 A/63 A (configurable)

Fuse protection: 
2x RCD type A/2x DC residual current detection 6 mA
2x circuit-breakers C20 3P+N/C40 3P+N
1x circuit breaker B16 1P

Earth system:
TN

Stand-by consumption:
< 13 W
 
 

Rated voltage, rated frequency:
400 V / 3 ~ / 50 Hz

Connection range:
5-pole connection via master switch       
and PE terminal (up to 35 mm²)

Over-voltage protection:
Type 2+3 in accordance with DIN EN 61643-11, all-pole

Output rating (per charging point):
11 kW (configurable)

 

 
 
Maximum input current (per phase): 
32 A/63 A (configurable)

Fuse protection: 
2x RCD type A/2x DC residual current detection 6 mA
2x circuit-breakers C20 3P+N/C40 3P+N
1x circuit breaker B16 1P

Earth system:
TN

Stand-by consumption:
< 13 W
 
 

Communications protocol:
OCPP 1.6 JSON
Connection to practically every backend possible

Authentication option:
RFID, Remote, without (Charge for free)

LED status:
LED status display per charging point

 

Communications interface: 
integrated 4G modem
Switch with four free Ethernet connections
100 Mbit/s Ethernet connection (e.g. Modbus)

Display: 
Graphic display (4.3")

 

 

 

 
IP protection class:
Housing IP44, relevant components IP54           

Standards:
DIN EN 61851-1
DIN IEC/TS 61439-7

Compliance:  
CE, RoHs, REACH            

Storage temperature:           
-25 °C to +80 °C

Height:
maximal 2000 m
 
 
Mechanical impact resistance:
IK10

Calibration law/Meter: 
MID-compliant Smart Meter
optional: with storage and display module (SAM®) for
compliant with calibration law billing available according to charging capacity
or charging duration

Operating temperature:  
-25 °C to +40 °C
 
 
Humidity:  
< 95 % (non condensing)
 
 
IP protection class:
Housing IP44, relevant components IP54           

Standards:
DIN EN 61851-1
DIN IEC/TS 61439-7

Compliance:  
CE, RoHs, REACH            

Storage temperature:           
-25 °C to +80 °C

Height:
maximal 2000 m
 
 
Mechanical impact resistance:
IK10

Calibration law/Meter: 
MID-compliant Smart Meter
optional: with storage and display module (SAM®) for
compliant with calibration law billing available according to charging capacity
or charging duration

Operating temperature:  
-25 °C to +40 °C
 
 
Humidity:  
< 95 % (non condensing)
 

Foil application
SMC base + base filler granulate
Assembly kit for assembly without finished base
Backend connection
Cable management
Giro-e
Service packages
Load management
Integration of RFID cards in White List

 

downloads

product-related materials