compleo duo ims

compleo duo ims

the intelligent one

the compleo duo ims

Completely prepared for grid-supportive control

DUO IMS is the optimal solution for municipalities and municipal utilities that want to connect and operate their charging stations without restrictions in public areas. The DUO IMS is the only charging solution that can be connected directly to all low-voltage grids without sub-distribution - whether in the middle of the city or in the countryside.

With the Duo IMS, Compleo is the only charging point manufacturer who meets all the requirements of VDE-AR-N 4100, which has introduced important innovations in the areas of charging solutions, electricity storage and low voltage in 2019. DUO IMS is available in the Advanced and Highline versions. The Highline version offers even more safety and availability through vandalism protection with lockable type 2 socket outlets and self-resetting residual current devices (RCD).

  • Full compliance with VDE-AR-N 4100

    Full compliance with VDE-AR-N 4100

  • Meter position version with: 1 or 2 eHZ, 3-point meter or transformer measurement

    Meter position version with: 1 or 2 eHZ, 3-point meter or transformer measurement

  • Type 2 socket outlet with lighted and lockable

    Type 2 socket outlet with lighted and lockable Sliding cover with LED status display

  • Charging in compliance with calibration law with SAM

    Charging in compliance with calibration law with SAM

  • bright 4.3" graphic display

    bright 4.3" graphic display

  • hot-pressed, glass-fibre reinforced SMC housing

    hot-pressed, glass-fibre reinforced SMC housing

  • two charging points with max. 11 / 22 kW

    two charging points with max. 11 / 22 kW

features

highlights
1 2 3 4 5
  • 1

    Type 2 socket outlet

  • 2

    Lighted and lockable sliding cover with LED status display

  • 3

    hot-pressed, glass-fibre reinforced SMC housing: lightweight, durable, impact-resistant, weatherproof, self-extinguishing (UL94-HB) andleakage current protected

  • 4

    Bright 4.3" graphic display

  • 5

    Charging in compliance with calibration law with SAM®

additional features
  • Full compliance with VDE-AR-N 4100
  • Meter position version with: 1 or 2 eHZ, 3-point meter or transformer measurement
  • Installation: Mounting on existing ground surface or on an optional plinth
  • access from front for installation and maintenance
  • safe access due to covered electrical components
  • automatically reactivating RCD
  • Maximum safety through hardware-based redundant cut-off
  • Over-voltage protection in accordance with DIN EN 61643-11
  • Unbalanced load limit for 1-phase and 2-phase charging vehicles
  • OCPP 1.6 JSON via integrated 4G modem or 100 Mbit/s Ethernet interface
  • Connection to practically every backend possible
  • Load management capable

technical specifications

compleo duo ims

Model name:
Compleo Duo BM IMS

Number of charging points:
2

 

 

Charging mode:
Mode 3

Charging points:
2 x type 2 socket outlet with maximum 11/22 kW, including sliding cover; automatic
locking at the start of the charging process as well as unlocking
at the end of the charging process or power failure

 

Dimensions (HxWxD):
1483 x 590 x 320 mm

Housing material:
hot-pressed, glass-fibre reinforced polyester (SMC)

Locking:
Swivelling lever, prepared for accommodation of one
profile half cylinder

 

 

 

Weight:
approx. 72–77 kg (depending on development status

Design:
Single-colour paintwork in RAL 9010 (pure white)
Optional: Paintwork, film lamination upon request

Construction / Assembly:
Base mounted or on an optional plinth

 

 

Rated voltage, rated frequency:
400 V / 3 ~ / 50 Hz

Connection range:
House connection box with steel frame terminals (10 bis 95 mm²)
Equipotential bonding rail with connection for local earth electrode

Over-voltage protection:
Type 1+2+3 in accordance with DIN EN 61643-11, all-pole

Output rating (per charging point):
11 kW/22 kW  (configurable)

 

 
 
Maximum input current (per phase): 
32 A/63 A (configurable)

Fuse protection: 
2x RCD type A/2x DC residual current detection 6 mA
2x circuit-breakers C20 3P/C40 3P
1x circuit breaker B16 1P

Earth system:
TN

Stand-by consumption:
< 13 W
 
 

Rated voltage, rated frequency:
400 V / 3 ~ / 50 Hz

Connection range:
House connection box with steel frame terminals (10 bis 95 mm²)
Equipotential bonding rail with connection for local earth electrode

Over-voltage protection:
Type 1+2+3 in accordance with DIN EN 61643-11, all-pole

Output rating (per charging point):
11 kW/22 kW  (configurable)

 

 
 
Maximum input current (per phase): 
32 A/63 A (configurable)

Fuse protection: 
2x RCD type A/2x DC residual current detection 6 mA
2x circuit-breakers C20 3P/C40 3P
1x circuit breaker B16 1P

Earth system:
TN

Stand-by consumption:
< 13 W
 
 

Communications protocol:
OCPP 1.6 JSON
Connection to practically every backend possible

Authentication option:
RFID, Remote, without (Charge for free)

LED status:
LED status display per charging point

 

Communications interface: 
integrated 4G modem
100 Mbit/s Ethernet connection (e.g. Modbus)

Display: 
Graphic display (4.3")

 

 

 

 

 
IP protection class:
IP54 based on all relevant components

Standards:
DIN EN 61851-1
DIN IEC/TS 61439-7

Compliance:  
CE, RoHs, REACH            

Storage temperature:           
-25 °C to +80 °C

Height:
max. 2000 m

Components for compliance with VDE-AR-N 4100:
House connection box (H: 420 x W: 250 x D: 138 mm)
for NH00 fuses

utility room on the line side (H: 300 x W: 250 x D: 128 mm)
for 1 x 50 A or 2 x 40 A selective circuit breaker ;
D01/6 A to supply RfZ and APZ

Meter field (H: 300 x W: 250 x D: 128 mm)
for 1 x 50 the installation of 1 or 2 eHZs*
Room for additional applications (RfZ)
(H: 150 x W: 250 x D: 128 mm)*
with Ethernet cable in the APZ
Contact for compliance with cut-off capability

utility room on the system side (H: 150 x W: 250 x D: 128 mm)

Termination point meter position (APZ) (H: 300 x W: 250 x D: 128 mm)

*Alternative option:
Meter field (H: 450 x W: 250 x D: 128 mm)
for the mounting of a 3-point meter
 
 
Mechanical impact resistance:
IK10

Calibration law/Meter: 
MID-compliant Smart Meter
optional: with storage and display module (SAM®) for
compliant with calibration law billing available according to charging capacity
or charging duration

Operating temperature:  
-25 °C to +40 °C
 
 
Humidity:  
< 95 % (non condensing)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
IP protection class:
IP54 based on all relevant components

Standards:
DIN EN 61851-1
DIN IEC/TS 61439-7

Compliance:  
CE, RoHs, REACH            

Storage temperature:           
-25 °C to +80 °C

Height:
max. 2000 m

Components for compliance with VDE-AR-N 4100:
House connection box (H: 420 x W: 250 x D: 138 mm)
for NH00 fuses

utility room on the line side (H: 300 x W: 250 x D: 128 mm)
for 1 x 50 A or 2 x 40 A selective circuit breaker ;
D01/6 A to supply RfZ and APZ

Meter field (H: 300 x W: 250 x D: 128 mm)
for 1 x 50 the installation of 1 or 2 eHZs*
Room for additional applications (RfZ)
(H: 150 x W: 250 x D: 128 mm)*
with Ethernet cable in the APZ
Contact for compliance with cut-off capability

utility room on the system side (H: 150 x W: 250 x D: 128 mm)

Termination point meter position (APZ) (H: 300 x W: 250 x D: 128 mm)

*Alternative option:
Meter field (H: 450 x W: 250 x D: 128 mm)
for the mounting of a 3-point meter
 
 
Mechanical impact resistance:
IK10

Calibration law/Meter: 
MID-compliant Smart Meter
optional: with storage and display module (SAM®) for
compliant with calibration law billing available according to charging capacity
or charging duration

Operating temperature:  
-25 °C to +40 °C
 
 
Humidity:  
< 95 % (non condensing)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Highline package: lockable type 2 socket outlet and self-resetting RCDs
Foil application
SMC base + base filler granulate
Assembly kit for assembly without finished base
Backend connection
Giro-e
Load management
Service packages

 

downloads

product-related materials