compleo cito 240

compleo cito 240

the fast one

the compleo cito 240

fast DC and AC charging compliant with calibration law

Compleo is also a pioneer in fast charging: The first DC charging stations to comply with calibration laws originated from the Dortmund production facility and were developed together with the Physikalisch-Technische Bundesanstalt (PTB) and certified by the PTB.

The Cito series features a convincing new design and attractive features in the housing: Optional DC/AC connections, intelligent load management, cable management, crash barrier and much more. Base mounting on a prefabricated base or direct mounting on a solid ground surface are both possible.

  • Two parallel charging processes (1x DC 1x AC simultaneously)

    Two parallel charging processes (1x DC 1x AC simultaneously)

  • Over-voltage protection in accordance with DIN EN 61643-11

    Over-voltage protection in accordance with DIN EN 61643-11

  • OCPP 1.6 JSON via integrated 4G modem

    OCPP 1.6 JSON via integrated 4G modem or 100 Mbit/s Ethernet interface

  • Charging in compliance with calibration law with SAM

    Charging in compliance with calibration law with SAM

  • bright 4.3" graphic display

    bright 4.3" graphic display

  • powder-coated stainless steel housing

    powder-coated stainless steel housing

  • up to three charging points max. 24 kW (DC)

    up to three charging points max. 24 kW (DC) and 22 kW (AC)

features

highlights
1 2 3 4 5
  • 1

    LED status display per charging point

  • 2

    Ambient lighting

  • 3

    Powder-coated stainless steel housing: durable, impact-resistant, weatherproof

  • 4

    Bright 4.3" graphic display

  • 5

    Charging in compliance with calibration law with SAM® (AC & DC)

additional features
  • Installation: Mounting on existing ground surface or on an optional plinth
  • access from front for installation and maintenance
  • safe access due to covered electrical components
  • Maximum safety through hardware-based redundant cut-off (AC)
  • Maximum safety due to insulation monitoring (DC)
  • Connection to practically every backend possible
  • Load management capable

technical specifications

compleo cito 240

Model name:
CITO BM 240

Number of charging points:
3 charging connections for simultaneous AC and DC charging
of vehicles (DC: CCS or CHAdeMo/AC: Type 2)

Ambient lighting:
Yes

 

 

 

 

 

Charging mode:
Mode 3 | Mode 4

Charging points:
Option 1: 3-in-1 with CCS | CHAdeMo | Type 2
CCS with attached cable with 24 kW, length 3 m (Mode 4)
CHAdeMo with attached cable with 24 kW, length 3 m (Mode 4)
Type 2 socket outlet with maximum 22 kW (Mode 3)

Option 2: 2-in-1 with CCS | Type 2
CCS with attached cable with 24 kW, length 3 m (Mode 4)
Type 2 socket outlet with maximum 22 kW (Mode 3)

Optional: 2-in-1 or 3-in1 with cable management system:
CCS with attached cable with 24 kW, length 6.2 m (Mode 4)
CHAdeMo with attached cable with 24 kW, length 6.2 m (Mode 4)
Type 2 socket outlet with maximum 22 kW (Mode 3)

Dimensions (HxWxD):
1608 x 721 x 341 mm (without cable)

Housing material:
Stainless steel (powder-coated)

Locking:
Swivelling lever, prepared for accommodation of one
profile half cylinder; optional: two profile half cylinders

 

 

 

Weight:
approx. 160 kg

Design:
Single-colour paintwork in RAL 9010 (pure white)

Construction/Assembly:
Base mounted or on an optional plinth

 

 

Rated voltage, rated frequency:
400 V / 3 ~ / 50 Hz

Connection range:
4-pole master switch (max. 50 mm²)
+ PE terminal
+ Main earthing bar with connection for local earth electrode

Over-voltage protection:
Type 1+2+3 in accordance with DIN EN 61643-11, all-pole

Output rating (per charging point):
AC: 22 kW; 400 V; 32 A
DC: 24 kW; 150–500 V; maximum 65 A

Efficiency:
> 94 % at 100 % power @ 65 A @ 400 V DC

 

 
 
Maximum input current (per phase): 
maximum 80 A (configurable)

Fuses: 
AC: 1 x RCD Type A/1 x DC residual current detection 6 mA
DC: 1 x MCB C50

Earth system:
TN

Stand-by consumption:
< 25 W
 
 

Rated voltage, rated frequency:
400 V / 3 ~ / 50 Hz

Connection range:
4-pole master switch (max. 50 mm²)
+ PE terminal
+ Main earthing bar with connection for local earth electrode

Over-voltage protection:
Type 1+2+3 in accordance with DIN EN 61643-11, all-pole

Output rating (per charging point):
AC: 22 kW; 400 V; 32 A
DC: 24 kW; 150–500 V; maximum 65 A

Efficiency:
> 94 % at 100 % power @ 65 A @ 400 V DC

 

 
 
Maximum input current (per phase): 
maximum 80 A (configurable)

Fuses: 
AC: 1 x RCD Type A/1 x DC residual current detection 6 mA
DC: 1 x MCB C50

Earth system:
TN

Stand-by consumption:
< 25 W
 
 

Communications protocol:
OCPP 1.6 JSON
Connection to practically every backend possible

Authentication option:
RFID, Remote, without (Charge for free)

LED status:
LED status display per charging point

 

Communications interface: 
integrated 4G modem
100 Mbit/s Ethernet connection (e.g. Modbus)

Display: 
Graphic display (4.3")

 

 

 

 
IP protection class:
IP54           

Standards:
DIN EN 61851-1
DIN EN 61851-23
DIN IEC/TS 61439-7

Compliance:  
CE, RoHs, REACH            

Storage temperature:           
-25 °C to +80 °C

Height:
maximal 2000 m
 
 
Mechanical impact resistance:
IK08

Calibration law / Meter: 
1 x MID-compliant Smart Meter available with storage and display module (SAM®)
for billing compliant with calibration law according to charging capacity and charging duration

1 x DC meter available with memory and display module (SAM®)
for billing compliant with calibration law according to charging capacity and charging duration

Operating temperature:  
-25 °C to +40 °C

Humidity:  
< 95 % (non condensing)
 
 
IP protection class:
IP54           

Standards:
DIN EN 61851-1
DIN EN 61851-23
DIN IEC/TS 61439-7

Compliance:  
CE, RoHs, REACH            

Storage temperature:           
-25 °C to +80 °C

Height:
maximal 2000 m
 
 
Mechanical impact resistance:
IK08

Calibration law / Meter: 
1 x MID-compliant Smart Meter available with storage and display module (SAM®)
for billing compliant with calibration law according to charging capacity and charging duration

1 x DC meter available with memory and display module (SAM®)
for billing compliant with calibration law according to charging capacity and charging duration

Operating temperature:  
-25 °C to +40 °C

Humidity:  
< 95 % (non condensing)
 
Foil application
Concrete base + base filler granulate
Stainless steel crash barrier, optionally with concrete base
Giro-e
Load management
Service packages
Integration RFID cards in White List
 

downloads

product-related materials