the compleo cito 500

fast DC and AC charging compliant with calibration law

Compleo is also a pioneer in fast charging: The first DC charging stations to comply with calibration laws originated from the Dortmund production facility and were developed together with the Physikalisch-Technische Bundesanstalt (PTB) and certified by the PTB.

The Cito series offers a convincing new design and attractive features in the housing: optional DC/AC connections, intelligent load management, cable management, crash barrier and much more. Base mounting on a prefabricated base or direct mounting on a solid ground surface are both possible.

Two parallel charging processes (1x DC 1x AC simultaneously)
Over-voltage protection in accordance with DIN EN 61643-11
OCPP 1.6 JSON via integrated 4G modem or 100 Mbit/s Ethernet interface

Charging in compliance with calibration law with SAM
bright 4.3" graphic display
powder-coated stainless steel housing
up to three charging points max. 50 kW (DC) and 22 kW (AC)

features

highlights

1 2 3 4 5

1
LED status display per charging point
2
Ambient lighting
3
Powder-coated stainless steel housing: durable, impact-resistant, weatherproof
4
Bright 4.3" graphic display
5
Charging in compliance with calibration law with SAM^® (AC & DC)

additional features

Installation: Mounting on existing ground surface or on an optional plinth
access from front for installation and maintenance
safe access due to covered electrical components
Maximum safety through hardware-based redundant cut-off (AC)

Maximum safety due to insulation monitoring (DC)
Connection to practically every backend possible
Load management capable

technical specifications

compleo cito 500

Model name:
CITO BM 500

Number of charging points:
3 charging connections for simultaneous AC and DC charging
of vehicles (DC: CCS or CHAdeMo/AC: Type 2)

Ambient lighting:
Yes

Charging mode:
Mode 3 | Mode 4

Charging points:
Option 1: 3-in-1 with CCS | CHAdeMo | Type 2
CCS with attached cable with 50 kW, length 3.4 m (Mode 4)
CHAdeMo with attached cable with 50 kW, length 3.3 m (Mode 4)
Type 2 socket outlet with maximum 22 kW (Mode 3)

Option 2: 2-in-1 with CCS | Type 2
CCS with attached cable with 50 kW, length 3.4 m (Mode 4)
Type 2 socket outlet with maximum 22 kW (Mode 3)

Optional: 2 in 1 or 3 in 1 with cable management system
CCS with attached cable with 50 kW, length 6.5 m (Mode 4)
CHAdeMo with attached cable with 50 kW, length 6.5 m (Mode 4)
Type 2 socket outlet with maximum 22 kW (Mode 3)

Dimensions (HxWxD):
1995 x 640 x 511 mm (without cable)

Housing material:
Stainless steel (powder-coated)

Locking:
Swivelling lever, prepared for accommodation of one
profile half cylinder; optional: two profile half cylinders

Weight:
approx. 300 kg

Design:
Single-colour paintwork in RAL 9010 (pure white)

Construction / Assembly:
Base mounted or on an optional plinth

Rated voltage, rated frequency:
400 V / 3 ~ / 50 Hz

Connection range:
4-pole master switch (maximum 95 mm²)
+ PE terminal
+ Main earthing bar with connection for local earth electrode

Over-voltage protection:
Type 1+2+3 in accordance with DIN EN 61643-11, all-pole

Output rating (per charging point):
AC: 22 kW; 400 V; maximum 32 A
DC: 50 kW; 200–480 V; maximum 125 A

Efficiency:
> 94 % at 100 % power @ 125 A @ 400 V DC

Maximum input current (per phase):
maximum 112 A

Fuse protection:
AC: 1 x RCD Type A/1 x DC residual current detection 6 mA
DC: 1 x MCB C100

Earth system:
TN

Stand-by consumption:
< 50 W

Rated voltage, rated frequency:
400 V / 3 ~ / 50 Hz

Connection range:
4-pole master switch (maximum 95 mm²)
+ PE terminal
+ Main earthing bar with connection for local earth electrode

Over-voltage protection:
Type 1+2+3 in accordance with DIN EN 61643-11, all-pole

Output rating (per charging point):
AC: 22 kW; 400 V; maximum 32 A
DC: 50 kW; 200–480 V; maximum 125 A

Efficiency:
> 94 % at 100 % power @ 125 A @ 400 V DC

Maximum input current (per phase):
maximum 112 A

Fuse protection:
AC: 1 x RCD Type A/1 x DC residual current detection 6 mA
DC: 1 x MCB C100

Earth system:
TN

Stand-by consumption:
< 50 W

Communications protocol:
OCPP 1.6 JSON
Connection to practically every backend possible

Authentication option:
RFID, Remote, without (Charge for free)

LED status:
LED status display per charging point

Communications interface:
integrated 4G modem
100 Mbit/s Ethernet connection (e.g. Modbus)

Display:
Graphic display (4.3")

IP protection class:
IP54

Standards:
DIN EN 61851-1
DIN EN 61851-23
DIN IEC/TS 61439-7

Compliance:
CE, RoHs, REACH

Storage temperature:
-25 °C to +80 °C

Height:
maximal 2000 m

Mechanical impact resistance:
IK10

Calibration law/Meter:
1 x MID-compliant Smart Meter available with storage and display module (SAM®)
for billing compliant with calibration law according to charging capacity and charging duration

1 x DC meter available with memory and display module (SAM®)
for billing compliant with calibration law according to charging capacity and charging duration

Operating temperature:
-25 °C to +40 °C

Humidity:
< 95 % (non condensing)

IP protection class:
IP54

Standards:
DIN EN 61851-1
DIN EN 61851-23
DIN IEC/TS 61439-7

Compliance:
CE, RoHs, REACH

Storage temperature:
-25 °C to +80 °C

Height:
maximal 2000 m

Mechanical impact resistance:
IK10

Calibration law/Meter:
1 x MID-compliant Smart Meter available with storage and display module (SAM®)
for billing compliant with calibration law according to charging capacity and charging duration

1 x DC meter available with memory and display module (SAM®)
for billing compliant with calibration law according to charging capacity and charging duration

Operating temperature:
-25 °C to +40 °C

Humidity:
< 95 % (non condensing)

Foil application
Concrete base + base filler granulate
Stainless steel crash barrier, optionally with concrete base
Giro-e
Load management
Service packages
Integration RFID cards in White List

downloads

product-related materials

Product image Cito 500 2 in 1

Product image Cito 500 3 in 1

Register here for our partner newsletter and never miss an update.